Used Dana 60 / AAM 11.5 for Sale — VIN-Verified.
Used & remanufactured differentials and rear axle assemblies — VIN-verified for the correct gear ratio, tested, and shipped from Pasadena. 0% restocking, ever.
Used & remanufactured Dana 60 / AAM 11.5 — VIN-verified, tested, and shipped nationwide from our Pasadena, TX facility. Fits F-250/350, Ram 2500/3500, HD 4x4.
The Dana 60 and AAM 11.5 are the heavy-duty axles for tow rigs and diesels. We match ratio, spline, and traction type by VIN so it handles your GVWR. Ultra Auto Parts TX is Houston's drivetrain specialist, and differentials and rear axle assemblies are squarely in our wheelhouse. From our shop at 5041 Spencer Hwy in Pasadena, we stock and source used and remanufactured differentials for trucks, SUVs and cars across the Houston metro — Ford 8.8 and 9.75, GM 10-bolt and 14-bolt, Dana 44 and Dana 60, Chrysler 9.25 and Toyota 8-inch. Every axle gets verified against your VIN and axle tag before it leaves. Drivetrain is our specialty, not a sideline — while general salvage yards sell whatever rolls in, we test differentials on backlash gauges and gear-pattern analyzers and match them to your exact gear ratio and traction setup. Whether you need a complete third member, a full-float rear axle assembly, or a limited-slip carrier, our bilingual (English/Spanish) team helps Houston, Pasadena, Deer Park and Pearland drivers get the right part the first time.
Known issues we check on the Dana 60 / AAM 11.5
The Dana 60 and AAM 11.5 are the HD tow-rig axles, and we inspect ring-and-pinion, carrier bearings, and the limited-slip clutches, plus on front Dana 60s the kingpin/ball-joint and U-joint condition. Ratio, spline count, and traction type vary by truck, so we match all three by VIN so it handles your GVWR. Every carrier is measured for backlash and gear pattern before it ships from Pasadena.
Used vs. remanufactured Dana 60 / AAM 11.5 — which to buy
A tested used Dana 60 or AAM 11.5 is a strong value when the gears and carrier check out, and ours are measured for backlash and pattern first. Remanufactured or a fresh setup makes sense on a heavy tow rig where you want new bearings and clutches with a longer warranty. We match ratio, spline, and traction type to your VIN. Send your VIN and we tell you honestly which fits your HD truck.
Why buy a quality used differentials?
A used or remanufactured differential is a fraction of new or dealer cost, and a complete used rear axle assembly often drops in with housing, carrier, gears and axle shafts already matched. Low-mileage salvage units from the same year/make/model carry the correct ratio and spline count, so you avoid guessing. Reman is built to OEM spec with new bearings and a fresh gear set for longer life and a stronger warranty.
Common signs you need a replacement
Failing differentials give warning signs: howling or whining that changes with speed (worn ring-and-pinion or bad bearings), a clunk on acceleration (worn spider/side gears or excess backlash), metal-flake in the fluid, and chatter on turns from a tired limited-slip. Ignored, spider gear failure or a spun bearing can lock or destroy the axle — replacing the unit is often smarter than a partial fix.
| Feature | Ultra Auto Parts TX | Typical salvage yard |
|---|---|---|
| Restocking fee | 0% — ever | ~20% |
| Warranty | 6 mo – 3 yr | 6 mo flat |
| Fitment | VIN-verified to your vehicle | Not verified |
| Drivetrain testing | Specialized per component | General salvage |
| Service | Bilingual · 10-min response | Varies |
Quick Quote Fastest lead
Send Name + Phone + Part + ZIP. VIN recommended for exact fitment.
Fitment Flags We Check
- Gear ratio MUST match the other axle (and speedometer/PCM) — 3.42 vs 3.73 will not mix on 4WD
- Open vs. limited-slip vs. locker changes the carrier and behavior — confirm what you have
- ABS/traction tone (reluctor) ring tooth count must match your sensor
- Axle width, spline count and flange/bolt pattern vary within the same axle family
- Drum vs. disc rear brakes affect the axle ends and backing plates
- Verify with VIN plus the axle tag / door-jamb RPO or axle code — not just year/make/model
Heavy-duty axles for diesel and tow rigs — Dana 60/70, GM 10.5 14-bolt full-float, and AAM 11.5 out of F-250/350, 2500/3500 and Ram HD trucks — are available and matched to your GVWR and ratio.
What to send for an exact quote
- VIN (best — locks ratio, traction type and spline)
- Year / make / model / trim
- Gear ratio (from the axle tag or door-jamb RPO)
- Open or limited-slip / locker
- Front or rear, and 2WD or 4WD
Every differential and rear axle carries our standard 6-month warranty, extendable up to 3 years on eligible units, with 0% restocking fee on returns — ever. Reman axles get the longest coverage.
Local Houston-area delivery is free with our own drivers; regional runs are a flat $100–200 and out-of-state ships at exact freight cost quoted up front — no surprise fees.
How It Works
FAQ — Differentials in Houston, TX
Where can I buy a used Dana 60 or AAM 11.5 near me in Houston?
Ultra Auto Parts TX carries tested, VIN-matched Dana 60 and AAM 11.5 axles at 5041 Spencer Hwy Ste 101 in Pasadena, near Houston. We provide free local Houston delivery and nationwide shipping, open Monday through Friday 8 to 5 Central, English and Spanish. Call or text 281-436-9991 with your VIN.
How much does a used Dana 60 cost?
Pricing depends on ratio, spline count, and traction type. We do not quote from memory — send your VIN to 281-436-9991 for the correct tested unit. Every order carries a 0% restocking fee, so there is no risk if plans change.
How do you verify a Dana 60 fits my HD truck?
We match ratio, spline count, and open vs limited-slip to your VIN so the axle handles your GVWR, and on front Dana 60s we check kingpin and U-joint condition. We measure backlash and gear pattern before shipping. Send your VIN to 281-436-9991 to confirm fitment.
Ultra Auto Parts TX is a used and remanufactured drivetrain-parts dealer in Pasadena, TX (Houston metro). 5041 Spencer Hwy Ste 101, Pasadena TX 77505 · (281) 436-9991 · Mon–Fri 8am–5pm CT · Bilingual · 0% restocking · 6mo–3yr warranty.
Shopping for a used differential or rear axle assembly in Houston TX? Ultra Auto Parts TX in Pasadena is Houston's drivetrain specialist for used and remanufactured differentials — Ford 8.8 and 9.75, GM 10-bolt and 14-bolt, Dana 44, Dana 60, Chrysler 9.25 and Toyota 8-inch. Every unit is VIN-verified for the correct gear ratio (3.42, 3.73, 4.10) and open vs. limited-slip setup, tested, and backed by a 6-month to 3-year warranty with 0% restocking. Bilingual service.